GeekVape Aegis Squonker Kit 100W

Description

GeekVape Aegis Squonker Kit 100W

• Brand: GeekVape
• Unit: set
• Net Weight: 190(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

INTRODUCTION

Product introduction

GeekVape Aegis Squonker Kit is a combination of Geekvape Aegis Squonker Box Mod and Geek Vape TENGU 24mm BF RDA. Aegis Squonker Kit is a Waterproof Box Mod RDA Kit. The Geekvape Aegis Squonker Kit 100W is powered by a separate 18650 battery and can be recharged via the front micro USB port. And Aegis Squonker uses an advanced intelligent AS-100 chipset, interchangeable pump section sleeve, accurately identify any connected nebulizer, fast and responsive ignition time, and allow the use of atomizers with resistances as low as 0.05 ohms. While maintaining the shock-proof and waterproof all AEGIS series are known for. And Aegis Squonker is made of lightweight and durable zinc-aluminum alloy, combined with protective silicone and rubber corners, retaining many of the iconic protection features of the AEGIS range. This means it can be immersed in 1 meter of water for up to 30 minutes without damaging the material or chipset. And you can use it in a dusty environment without worrying about being unusable. Aegis Squonker Kit also prevents falling. In addition, the Aegis Squonker is constructed with an exceptional AS chipboard to produce stable and sound operation with up to 100 watts of output. Modes are wide-ranging and include curve mode, power mode, temperature control mode, TCR mode, and a temperature control suite with nickel, titanium or stainless steel atomizers. Any atomizer with a 0.05ohm or higher resistance is compatible with this squonk mod. For safety, there are a plethora of safety features such as over-current protection, dry-hit protection, overheat protection, overcharge protection, over-discharge protection, short circuit protection, and over puff protection.

Parameters

GeekVape Aegis Squonker 100W Box Mod
Size: 87.7mm x 30.9mm x 53.5mm
Battery: Single High-Amp 18650 Battery (Not Included)
Chipset: AS-100
Wattage Output Range: 5-100W
Resistance Range: 0.05ohm-3.0ohm
Modes: Power/TC(Ni,Ti,SS)/TCR/VPC/BYPASS
Temperature Range: 100°-315°C / 200°-600°F
Material: Zinc-Aluminium Alloy Chassis Construction + Rubberized Exterior Edge
Display: OLED Display Screen
Port: Micro USB onboard charging
Connection: Spring-Loaded 510 Connection
Safety protections: Anti-dry, Overheat, Over-current, Overpfuff, Over-discharge, Overcharge, Short circuit

 

Geek Vape TENGU BF RDA 24mm
Diameter：24mm
Coil Configuration: Single or Dual Coil
Airflow: Side to Coil Airflow
Connection: Gold-Plated 510 Connection Pin
Drip Tip: 810 Widebore PMMA Drip Tip, 810 Widebore Delrin Drip Tip
Material: Superior Stainless Steel Construction
Colors: Black, Golden, Blue, Stainless Steel, Rainbow, Gunmetal

GeekVape Aegis Squonker Kit 100W comes with

1 * Aegis Squonker 100W Box Mod
1 * Tengu BF RDA Tank 24mm
1 * Squonking Rear Section
2 * 0.4ohm N80 Fused Clapton Coil
1 * Battery Door Assist Tool
1 * Spare Parts Pack
4 * Agleted Cotton Strips
1 * MicroUSB Cable
1 * User Manual

SPECIFICATION

Features

• Small and portable
• AS-100 Chipset
• Waterproof, dustproof and shock-resistant
• Made from zinc alloy and Rubberized exterior edge
• Maximum Power output 100W
• Wide range of modes, such as Power/TC (Ni, Ti, SS) / TCR / VPC / BYPASS
• Interchangeable Squonking Section
• Multiple security features
• Compatible with any atomizer with 0.05 ohm or higher resistance